i-Panels have electrical motor starter with horsepower ranges from 1/2HP up to 800HP.
– These control panels are configured by all kinds of motor starters such as Direct On-Line (DOL) or Star/Delta Starter (S/D starter) or Soft Starter, VSD …
– The Standard Controls consist of START/STOP, we can customize the controls for your applications.
– Enclosed starter for three phase motor
– Controlled via Start Stop Push Button.
– Lockable disconnect – Reliable Operation – Excellent Designing
– Most extensive operation voltage from 200 to 500 V
– Monitor parameter such as current, volt
– Controlled by start stop push button
– Auto / Manual operation switch
– Phase protection from the outside to the motor side
– Lockable disconnecting
– Remote sensing dry run / No-load current
– Heavy-duty terminal for input/output connections
Advanced features (intelligent Fan Control)
– Energy Saving
– Easy to check status of fan and parameters of fan such as capacity, consumption, current, voltage, flow,… via HMI
– Easy to logging, collect the data, fault history,…
– Flexible to connect Ethernet communication allow client to monitor and management system.
– Reduce downtime, prevent over-pressure on ducting.
|1||Functionally||Fixed type or with-drawable tye|
|2||Rated operational voltage (Ue)||Up to 415 VAC|
|3||Rated frequency||50/60 Hz|
|4||Rated current (In)||Up to 1600 A|
|5||Rated insulation voltage (Ui)||1000 V|
|6||Rated impulse withstand voltage (Uimp)||12 kV|
|7||Rated short-time withstand current (Icw)||Up to 100 kA/1s|
|8||Rated peak withstand current (Ipk)||220kA|
|9||Motor feeder||Up to 800HP|
|10||Degree of protection||Up to IP54|
|W: 600, 800, 1000, 1200mm|
|D: 600, 800, 1000mm|